Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Scorpio Goa Getaway
  6. : How to reset the Mahindra Scorpio ODO light

Mahindra Scorpio Goa Getaway - Video tutorial

Model: Mahindra Scorpio Goa Getaway MK 3 - Years 2014-2023
Part: -board computer
Operation: How to reset the Mahindra Scorpio ODO light

If you want to reset the "ODO" light on your Mahindra Scorpio but you don't know how to do it, don't worry because in the following mini guide you will find all the information you need. First insert the key, turn it to position one and turn on the car ignition. Once this is done, locate the two "Set" and "Mode" buttons located in the center of the panel (between the tachometer and the speedometer). Keep them pressed simultaneously for about two seconds and release them as soon as the reset is confirmed on the display. At this point you can turn off the ignition and the procedure is over.


Posted on 7 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos