Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Xuv300
    4. : Disassembly and replacement of the Mahindra Xuv300 steering wheel airbag

Mahindra Xuv300 - Video tutorial

Model: Mahindra Xuv300 MK 1 - Years 2019-2024
Part: Airbags
Operation: Disassembly and replacement of the Mahindra Xuv300 steering wheel airbag

Let's find out today necessary instructions on how to disassemble and replace the steering wheel airbag of the Mahindra Xuv300, following these simple and quick steps. First of all, we get into the car, on the driver's side, and start inserting something pointed (like a Phillips screwdriver) inside the holes located behind the steering wheel airbag, in order to release it, as shown in the video. Once the airbag has been removed, we disconnect its electrical connector, which we find on the back, in order to remove it and replace it with the new one; let's install it correctly on the steering wheel, connecting the cable!


Posted on 26 May 2024 by ScegliAuto



How to deactivate the airbag of the Mahindra XUV300?
Mahindra Xuv300 (2019-2024 / MK 1) Disabling the passenger airbag of the Mahindra Xuv300 is a very simple operation that is usually done after maintenance or when we need to install a
Fuse box of a Mahindra XUV300
Mahindra Xuv300 (2019-2024 / MK 1) Thanks to today's very useful video tutorial, we can see exactly where the two fuse boxes are located inside our brand new Mahindra XUV300. The first
Where is the fuse box on the Mahindra XUV300
Mahindra Xuv300 (2019-2024 / MK 1) The fuse box inside your Mahindra XUV300 is very well hidden inside the cabin for safety reasons. Below we will give you all the various indications

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos