Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Xuv500
    4. : How to replace the headlight bulbs on the Mahindra Xuv 500

Mahindra Xuv500 - Video tutorial

Model: Mahindra Xuv500 MK 1 - Years 2011-2018
Part: Headlight bulb
Operation: How to replace the headlight bulbs on the Mahindra Xuv 500

If we intend to replace the bulbs of your car headlight with an equivalent LED model, in the description below we will find the methods to follow and the steps to take to reach the goal. After opening the bonnet proceed to unscrew the fixing screws of the light unit and with the help of a plastic lever remove the side profile of the bumper. Then pull the optical unit towards you, paying attention to the cables and connectors placed behind it. Then remove the lamp holder and replace it with the LED lamp and then proceed to disconnect the old lamp holder and connect it to the new one. Do this for both lights and that's it.


Posted on 6 July 2022 by ScegliAuto



How to replace the Mahindra XUV 500 cabin air filter
Mahindra Xuv500 (2011-2018 / MK 1) The air filter in the cabin of your Mahindra XUV 500 plays a central role in maintaining the optimum quality of breathed air when using the air condi
How to replace the key battery of the Mahindra Xuv 500
Mahindra Xuv500 (2011-2018 / MK 1) If the key battery in your Mahindra Xuv 500 is completely dead and you need to replace it then this guide is all you need. In fact, it will be enough
How to replace remote control battery on Mahindra XUV 500
Mahindra Xuv500 (2011-2018 / MK 1) In this video tutorial we can see how to replace the remote control battery on a Mahindra XUV 500 by following a few simple steps that will guide you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos