Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Mahindra XUV 500

Model: Mahindra Xuv500 MK 1 - Years 2011-2018
Part: Warning light – error code

In this guide, discover the procedure to reset the service light for the routine maintenance oil change on the Mahindra XUV 500. First, get in the vehicle and connect your diagnostic tool to the OBD port; then turn on the ignition, allowing the software to communicate with the engine control unit. At this point, select the brand, model, and engine type, navigate to the oil light reset option, and confirm the start of the procedure. You will then see the light reset on the instrument panel!

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of the Mahindra XUV 500
Mahindra Xuv500 (2011-2018 / MK 1) Replacing the button battery inside your Mahindra XUV 500 key (2011-2018) is a very simple task. First, get a flathead screwdriver and insert its tip…
How to Replace the Cabin Air Filter in the Mahindra XUV 500
How to Replace the Cabin Air Filter in the Mahindra XUV 500
Mahindra Xuv500 (2011-2018 / MK 1) The cabin air filter in your Mahindra XUV 500 plays a crucial role in maintaining optimal air quality while using the air conditioning. Therefore, it…
How to Replace the Key Battery of the Mahindra Xuv 500
How to Replace the Key Battery of the Mahindra Xuv 500
Mahindra Xuv500 (2011-2018 / MK 1) If the battery of your Mahindra Xuv 500 key is completely dead and you need to replace it, this guide is all you need. Just follow these steps to per…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos