Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Scorpio Goa Getaway
    4. : What do the letters 2H, 4H and 4L mean on the Mahindra Scorpio Goa Getway

Mahindra Scorpio Goa Getaway - Video tutorial

Model: Mahindra Scorpio Goa Getaway MK 2 - Years 2009-2014
Part: Accessory Kit
Operation: What do the letters 2H, 4H and 4L mean on the Mahindra Scorpio Goa Getway

As shown in the video, in the Mahindra Scorpio Goa Gateway car there is a knob that can be placed on 3 different positions: 2H, 4H and 4L. What do each of them mean? Respectively they mean: 2H, 2 drive wheels (rear) and normal gears suitable for normal driving conditions on asphalt; 4H: 4 wheel drive and normal gears suitable for slippery surfaces, sand, gravel, snow and mud. 4L or 4Wd (four-wheel drive): 4-wheel drive and low gears, suitable for extreme off-road driving conditions such as, for example, hills, rough roads. As the video shows, to switch from one guide to another, just move the knob and the correct positioning will be highlighted in green on the dashboard.


Posted on 30 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos