Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil in a Mahindra XUV500?

Model: Mahindra Xuv500 MK 1 - Years 2011-2018
Part: Engine oil

In this tutorial, you will see how to change the engine oil in a Mahindra XUV500, a very simple operation. First, wait for the engine to cool completely, then remove the upper fill cap. Go underneath the vehicle and loosen the drain plug. After draining all the oil from the system, tighten the plug, remove the air filter housing, and take out the oil filter located directly beneath it. At this point, simply install the replacement filter and add the required amount of oil through the upper opening.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Mahindra XUV500 Display
How to Reset the Service Light on the Mahindra XUV500 Display
Mahindra Xuv500 (2011-2018 / MK 1) This guide shows you how to reset the maintenance light for the oil change that appears on the central display of the Mahindra XUV500. First, get in …
How to Replace the Cabin Filter on a Mahindra XUV500?
How to Replace the Cabin Filter on a Mahindra XUV500?
Mahindra Xuv500 (2011-2018 / MK 1) In this tutorial, you will see how to replace the cabin filter on a Mahindra XUV500, a very simple and quick operation. First, position yourself in t…
How to Replace the Key Shell of the Mahindra Xuv500?
How to Replace the Key Shell of the Mahindra Xuv500?
Mahindra Xuv500 (2011-2018 / MK 1) To replace the key shell of the Mahindra Xuv500, lift the key by pressing the designated button to leverage it out of its housing. This will allow yo…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos