Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Xuv500
  6. : How to reset the service light on the Mahindra XUV500 display

Mahindra Xuv500 - Video tutorial

Model: Mahindra Xuv500 MK 1 - Years 2011-2018
Part: Checks and maintenance
Operation: How to reset the service light on the Mahindra XUV500 display

We see in this guide the procedure that will allow us to reset the oil change routine maintenance warning light, which appears on the central display, of the Mahindra XUV500. First of all we get on board the car and start turning on the instrument panel; after which we connect our diagnostic tool, in order to start the communication between the software and the control unit, as shown in the video. Now we select the brand, model and engine, following the procedure indicated and confirming the reset of the engine oil warning light to reset it from the central display!


Posted on 30 October 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos