Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Supro
  6. : How to reset the engine light on the Mahindra Supro

Mahindra Supro - Video tutorial

Model: Mahindra Supro MK 1 - Years 2015-2022
Part: -board computer
Operation: How to reset the engine light on the Mahindra Supro

If you notice the orange engine warning light on the dashboard of your Mahindra Supro even though it does not have any anomalies, then you must necessarily reset it manually through the following procedure. First, go inside the vehicle and make sure you close all the doors correctly. Then insert the key and turn the instrument panel on and off three times in succession. Then remove the key, insert it again and turn it to position two. Turn on the ignition and the warning light should have disappeared. In case of errors, turn off the ignition and start the procedure from the beginning.


Posted on 13 November 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos