Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Restore the Function of the Windshield Washer Nozzles on a Mahindra Xylo

Model: Mahindra Xylo MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Windshield washer nozzle

Video tutorial

If you notice that when you activate the wipers, the washer fluid does not come out, you may need to clean the tubes and the nozzle itself. You should also check the washer fluid level in the reservoir.

First, open the hood, locate the small washer fluid reservoir, and check its presence. Then, locate the tube that feeds the two washer nozzles and disconnect it from the nozzles.

Use a very thin wire to insert into the end of the tubes to remove any impurities or dirt, and especially insert it from the inside into the nozzle to clear any blockages. Then, reconnect the tubes and close the washer fluid reservoir cap.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

How to Install Plastic Wheel Covers on the Mahindra Xylo
How to Install Plastic Wheel Covers on the Mahindra Xylo
Mahindra Xylo (2009-2019 / MK 1) In this video, you will learn how to install plastic wheel covers on the Mahindra Xylo. If you want to replace the wheel covers on your Mahindra Xylo…
How to Replace the Oil Filter on a Mahindra Xylo
How to Replace the Oil Filter on a Mahindra Xylo
Mahindra Xylo (2009-2019 / MK 1) In today's video, we will go through the steps to remove and replace the oil filter on a Mahindra Xylo. First, lift the vehicle and begin draining th…
How to Replace the Rear Suspension on a Mahindra Xylo
How to Replace the Rear Suspension on a Mahindra Xylo
Mahindra Xylo (2009-2019 / MK 1) This guide provides the main instructions to remove and replace the rear suspension on a Mahindra Xylo. First, lift the vehicle with a jack and begin…

How to Open the Bonnet of the Toyota C-HR?

In this tutorial, you will learn how to open the bonnet of the Toyota C-HR, a very simple operation that follows the typical procedure for most vehicles. First, unlock the catches using the remote button, then open the driver's door, locate the lever in the lower left area of the dashboard, and pull it. Next, move to the front of the vehicle, locate the second lever, push it to the left, and simultaneously lift the bonnet. To close it, simply let it drop gently.

Watch the video!


by ScegliAuto

More videos