Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Color of the Brake Caliper on the Mahindra Xuv300

Model: Mahindra Xuv300 MK 1 - Years 2019-2026

This guide provides instructions for painting the front brake caliper of the Mahindra Xuv300, changing its color. First, lift the vehicle and remove the front wheel; then mask off the brake system, leaving only the brake caliper exposed (mask everything well if you do not want to remove the brake caliper), as shown in the video. At this point, apply multiple coats of paint to the front brake caliper, allowing for drying time between coats.

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Dashboard Light Color on the Mahindra XUV300
Mahindra Xuv300 (2019-2026 / MK 1) To customize the dashboard lights on this vehicle, follow the instructions summarized below and refer to the video as well. First, sit in the driver'…
How to Change the Key Fob Battery of the Mahindra XUV300
How to Change the Key Fob Battery of the Mahindra XUV300
Mahindra Xuv300 (2019-2026 / MK 1) In this video, you can see how to change the battery of the remote for the Mahindra XUV300: it is a very simple operation because you just need to re…
Where to Find the Fuse Box in the Mahindra XUV300
Where to Find the Fuse Box in the Mahindra XUV300
Mahindra Xuv300 (2019-2026 / MK 1) If you are looking for the fuse box inside your Mahindra XUV300 but haven't found it yet, don't worry; just follow these instructions carefully. Firs…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos