Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Bolero
    4. : How do I replace the key shell on my Mahindra Bolero?

Mahindra Bolero - Video tutorial

Model: Mahindra Bolero MK 1 - Years 2000-2022
Part: Key
Operation: How do I replace the key shell on my Mahindra Bolero?

In order to replace the shell of the Mahindra Bolero key, you need to lift the key with the appropriate button, so that it levers inside its housing. After the two halves that make up the remote control have been opened, it will be possible to remove the battery and the chip inside it; then you will also have to unscrew the screw that fixes the key so that it is fixed to the new shell. After inserting all the components inside the new shell, it will be necessary to close it and verify that the device works correctly.


Posted on 20 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos