Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Bolero
  6. : How to replace the Mahindra Bolero key battery

Mahindra Bolero - Video tutorial

Model: Mahindra Bolero MK 1 - Years 2000-2022
Part: Key
Operation: How to replace the Mahindra Bolero key battery

If you want to replace the button battery in the key of your Mahindra Bolero Mk1, just put the following steps into practice. The whole operation takes a few seconds to complete so you will not have any difficulties even if you are not particularly familiar with do-it-yourself maintenance. First remove the back of the cover by pulling it off with your own hands. Immediately after, remove the exhausted coin cell battery and proceed with the assembly of the new battery. Finally, correctly replace the back cover removed previously and you are done.


Posted on 5 July 2022 by ScegliAuto

This video is currently unavailable

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos