Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Mahindra Tuv300 - Key

Mahindra Tuv300 (2015-2020 / MK 1)
How to remove the transponder from the key on the Mahindra Tuv300.
If we need to dismantle or replace the transponder in the key of this car model, in the description below we can find the instructions and procedures to follow …read all…
Posted on 31 March 2023 by ScegliAuto
Mahindra Tuv300 (2015-2020 / MK 1)
How do you replace the key shell of the Mahindra Tuv300?
In order to replace the key cell shell of the Mahindra Tuv300 you need to unscrew the screw located in the upper part of the remote control, immediately under …read all…
Posted on 13 May 2024 by ScegliAuto
Mahindra Tuv300 (2015-2020 / MK 1)
How to replace the remote control battery of Mahindra TUV300?
In this tutorial we can see how to replace the Mahindra TUV300 remote control battery. For this quick and easy operation, we will need a replacement CR1632 …read all…
Posted on 5 May 2024 by ScegliAuto
Car stereo (1) Key (3) -board computer (2) Checks and maintenance (3) Cabin air filter (3) Headlight bulb (2) Engine oil (1) Door panel (1) Wheel (1) Fuse box (2) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos