Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Tuv300
    4. : Checks and maintenance

Mahindra Tuv300 - Checks and maintenance

Mahindra Tuv300 (2015-2020 / MK 1)
How to reset the service in Mahindra TUV300?
In this tutorial, we can see how to reset the service in the Mahindra TUV300, an extremely simple and quick operation, to be done only after completing all the …read all…
Posted on 2 December 2023 by ScegliAuto
Mahindra Tuv300 (2015-2020 / MK 1)
How to reset the service light on the Mahindra Tuv300?
The video presented here shows us how to reset the service light, the one shaped like a wrench that is seen on the display, in a Mahindra Tuv300, but the exact …read all…
Posted on 23 June 2023 by ScegliAuto
Mahindra Tuv300 (2015-2020 / MK 1)
How to do oil change on Mahindra Tuv300
If we want to proceed in do-it-yourself mode with replacing the engine oil and the relative filter on this car, we can proceed by following the instructions in …read all…
Posted on 26 April 2023 by ScegliAuto
Car stereo (1) Key (3) -board computer (2) Checks and maintenance (3) Cabin air filter (3) Headlight bulb (2) Engine oil (1) Door panel (1) Wheel (1) Fuse box (2) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos