Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Tuv300
    4. : How to do oil change on Mahindra Tuv300

Mahindra Tuv300 - Video tutorial

Model: Mahindra Tuv300 MK 1 - Years 2015-2020
Part: Checks and maintenance
Operation: How to do oil change on Mahindra Tuv300

If we want to proceed in do-it-yourself mode with replacing the engine oil and the relative filter on this car, we can proceed by following the instructions in this description and also helping ourselves with the images in the video. The first thing to do is open the bonnet and raise the car, locate the oil sump and the oil drain plug. Proceed to unscrew the cap and place a container to collect the used oil on the floor. Then identify the oil filter which is positioned underneath next to the battery and replace it, always taking care to replace the gasket. Then screw the oil drain plug back on and return to the engine compartment to fill the circuit with new oil.


Posted on 26 April 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos