Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Tuv300
    4. : How to check fluid levels on Mahindra Tuv300

Mahindra Tuv300 - Video tutorial

Model: Mahindra Tuv300 MK 1 - Years 2015-2020
Part: Engine oil
Operation: How to check fluid levels on Mahindra Tuv300

Let's see in this video and in the description below how to check the fluid levels of this car: first of all we can check the engine oil level with the appropriate dipstick which we will remove and clean with a cotton cloth . On the end of the dipstick there are two minimum and maximum indicators, insert the dipstick again and then extract it again and check if the oil level is precisely between the minimum and maximum. Then we can also check the brake oil level. To do this, the minimum and maximum levels are indicated on the transparent plastic tank marked with the yellow cap. Finally we can check the coolant level by reading the level on the tank which also in this case must be between the minimum and the maximum.


Posted on 14 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos