Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Chain on Malaguti Dune 125

Model: Malaguti Dune 125
Part:

Video tutorial

Remove the bolt that secures the upper chain guard and take it off, then do the same with the small front guard as shown in the video (there are two screws here). Now loosen the various bolts that tension the chain itself, until you reach the central pin. Extract the chain from its seat, but first remove the retaining clip using any tool that makes the operation easier (a flat screwdriver as shown in the video, or a pair of fine pliers will work).

Done! Now proceed in reverse for reassembly. This is not a very difficult operation but it does require time.


Updated on 13 April 2026 by ScegliAuto


Related tutorials

How to Bleed the Brakes on a Malaguti Dune 125?
How to Bleed the Brakes on a Malaguti Dune 125?
Dune 125 You can bleed the brakes on the Malaguti Dune 125 by loosening the small bleed screw located at the brake caliper for both the front and rear brakes;…
How to Replace the Grips on a Malaguti Dune 125?
How to Replace the Grips on a Malaguti Dune 125?
Dune 125 To replace the grips on a Malaguti Dune 125, grasp the old grips and pull them back to remove them from their housing. Once the old grips are removed…
Engine Oil Change on Malaguti Dune 125 - Derbi Terra 125
Engine Oil Change on Malaguti Dune 125 - Derbi Terra 125
Dune 125 In this video, you will find the main instructions for performing an engine oil change during the regular maintenance service on a Malaguti Dune 125,…

How to Replace the Piston on a Derbi GPR 125

To replace the piston on a Derbi GPR 125, loosen the bolts securing the cylinder head to its housing, allowing it to be removed along with the valve cover. This will enable you to access the bolts securing the cylinder at the top of the engine, allowing for its complete removal and revealing the underlying piston. The piston can now be freed from its securing bolts, enabling you to position the new piston onto the corresponding conrod. After installation, refit the engine components.

Watch the video!


by ScegliAuto

More videos