Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To bleed the braking system of the Malaguti Dune 125, remove the bolt located on the brake caliper to open the appropriate cap. Connect a tube to this, with the other end placed inside a container. By pumping the brake lever, the fluid will exit the tube and flow into the container. This procedure must be performed for both the front and rear brakes. Once all the old fluid has completely drained, replace it with new fluid that meets the correct specifications.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Bleed the Brakes on a Malaguti Dune 125?
How to Bleed the Brakes on a Malaguti Dune 125?
Dune 125 You can bleed the brakes on the Malaguti Dune 125 by loosening the small bleed screw located at the brake caliper for both the front and rear brakes;…
How do you replace the spark plug of the Malaguti Dune 125?
How do you replace the spark plug of the Malaguti Dune 125?
Dune 125 The spark plug of the Malaguti Dune 125 can be replaced by disconnecting the corresponding ignition coil located on the top of the engine cylinder: o…
Engine Oil Change on Malaguti Dune 125 - Derbi Terra 125
Engine Oil Change on Malaguti Dune 125 - Derbi Terra 125
Dune 125 In this video, you will find the main instructions for performing an engine oil change during the regular maintenance service on a Malaguti Dune 125,…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos