Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the cylinder on the Malaguti Phantom F12, you need to remove the engine from its housing. Once the engine is removed, loosen the screws securing the cylinder to its upper part. After removing the spark plug, you can also take out the cylinder from its housing, exposing the piston and connecting rod underneath. At this point, position the new cylinder in its housing, securing it with the screws and reinstalling the spark plug on top.

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Instrument Cluster from a Malaguti Phantom F12
How to Remove the Instrument Cluster from a Malaguti Phantom F12
Phantom F12 50 Before starting, position your Malaguti Phantom F12 on the central stand. Begin by unscrewing and removing the lower screws that secure the instrumen…
How do you disassemble the engine of the Malaguti Phantom F12 70?
How do you disassemble the engine of the Malaguti Phantom F12 70?
Phantom F12 50 In order to disassemble the engine of the Malaguti Phantom F12 70, you need to loosen the screws that secure the fairings around the underseat compar…
How do you disassemble the engine of the Malaguti Phantom F12 75?
How do you disassemble the engine of the Malaguti Phantom F12 75?
Phantom F12 50 It will be possible to disassemble the engine of the Malaguti Phantom F12 75 by loosening the screws that secure the engine block to its housing, at …

How to Reset the Service Light on the Yamaha Xmax 250?

To reset the service light on the Yamaha Xmax 250, you need to insert the ignition key into the appropriate slot, so that you can turn it and switch on the instrument panel. Once this is done, press and hold the central button located on the left side of the instrument panel: the button should be held for about 20 seconds. When released, you will notice that the flashing service light has turned off: to verify that the reset has occurred correctly, you will need to switch off and then switch on the vehicle's instrument panel.

Watch the video!


by ScegliAuto

More videos