Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Dzire
    4. : Air filter

Maruti Dzire - Air filter

Maruti Dzire (2012-2017 / MK 2)
How to replace the air filter on the Maruti Dzire
If we need to replace the air filter on this car, we can take a look at the video images and consult the instructions in the description below. After opening …read all…
Posted on 10 May 2023 by ScegliAuto
Maruti Dzire (2012-2017 / MK 2)
How to change the air conditioning filter on Maruti Dzire / Suziki Swift
Let's see how to change the air conditioning filter on Maruti Dzire (or Suzuki Swift). we have to remove the glove box, then we have to empty it, and being …read all…
Posted on 5 September 2022 by ScegliAuto
Maruti Dzire (2012-2017 / MK 2)
How to replace the air filter on Maruti Dzire
The air filter inside the engine compartment of your Maruti Dzire is a very important component and guarantees maximum engine efficiency and reliability. For …read all…
Posted on 23 June 2022 by ScegliAuto
Airbags (1) Shock absorbers (1) Bodywork (1) Checks and maintenance (2) Headlight (1) Air filter (3) Cabin air filter (2) Accessory Kit (1) Light bulb (1) Front bumper (1) Instrument cluster (2) Wheel (2) Fuse box (1) Windscreen wipers (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos