Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Maruti
  4. :
  5. Maruti 800
  6. : Checks and maintenance

Maruti 800 - Checks and maintenance

Maruti 800 (1984-2014 / MK 1)
How do you replace the catalyst of the Maruti 800?

To be able to replace the catalyst of the Maruti 800 you have to go and lift the car, so that you can have access to the components in its lower part: here it …read all…
Posted on 11 September 2022 by ScegliAuto
Maruti 800 (1984-2014 / MK 1)
How do you replace the front fender of the Maruti 800?

In order to replace the front fender of the Maruti 800 it is necessary to completely disassemble the corresponding headlight and the front bumper, loosening …read all…
Posted on 6 May 2024 by ScegliAuto

Checks and maintenance (2) Headlight (1) Air filter (2) Accessory Kit (1) Headlight bulb (1) Rear light bulb (1) Gear oil (1) Engine oil (1) Brake pads (1) Fuse box (2) Seat (1) Drive shaft (1) Side window (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos