Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Maruti 800
    4. : Drive shaft

Maruti 800 - Drive shaft

Maruti 800 (1984-2014 / MK 1)
How to replace the front axle shaft of the Maruti 800
Today we will see, in this short and simple guide, how to disassemble and replace the front axle shaft of the Maruti 800, following the instructions below. …read all…
Posted on 18 July 2022 by ScegliAuto
Checks and maintenance (2) Headlight (1) Air filter (2) Accessory Kit (1) Headlight bulb (1) Rear light bulb (1) Gear oil (1) Engine oil (1) Brake pads (1) Fuse box (2) Seat (1) Drive shaft (1) Side window (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos