Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Fender of the Maruti 800?

Model: Maruti 800 MK 1 - Years: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
Part: Checks and maintenance

Video tutorial

To replace the front fender of the Maruti 800, remove the corresponding headlight and front bumper by loosening their mounting bolts. Once these components are removed, loosen the bolts securing the fender, also extracting the turn signal light from its housing and disconnecting its connector.

After these parts are removed, detach the fender itself to install a new one. Secure the new fender by reinstalling all previously removed components.


Updated on 18 May 2026 by ScegliAuto


Related tutorials

Where are the fuses located in the Maruti 800?
Where are the fuses located in the Maruti 800?
Maruti 800 (1984-2014 / MK 1) The fuses in the Maruti 800 are located inside the fuse box installed in the vehicle: it is situated in the cabin, on the lower left side of the dash…
How to Remove the Seats from the Maruti 800
How to Remove the Seats from the Maruti 800
Maruti 800 (1984-2014 / MK 1) In this guide, you will find the main instructions that will allow you to remove and replace the seats in the Maruti 800 by following these simple st…
Replace the Front Brake Pads of the Maruti 800
Replace the Front Brake Pads of the Maruti 800
Maruti 800 (1984-2014 / MK 1) Today, you will see in this video tutorial how to remove and replace the front brake pads of the Maruti 800. First, raise the vehicle and remove the …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos