Do it yourself
Frequently asked questions about cars and motorcycles

Replace the front brake pads of the Maruti 800.

Model: Maruti 800 MK 1 - Years 1984-2014
Part: Brake pads

Today in this video tutorial, we will see how to disassemble and replace the front brake pads of the Maruti 800. First, we lift the car and remove the front wheel. Then, we unscrew the brake caliper fixing bolts to remove it from the disc, as shown in the video. At this point, we remove the old brake pads from the caliper support, clean the caliper from dirt, apply pressure on the piston to retract it, and install the new high-quality brake pads by reversing the disassembly process!


Posted on 26 October 2024 by ScegliAuto



How do you replace the front fender of the Maruti 800?
Maruti 800 (1984-2014 / MK 1) In order to replace the front fender of the Maruti 800 it is necessary to completely disassemble the corresponding headlight and the front bumper, lo
How to replace the headlights of the Maruti 800
Maruti 800 (1984-2014 / MK 1) In this guide, let's find out the main instructions for disassembling and replacing the front lights of the Maruti 800. First of all, we open the bon
How to remove the seats of the Maruti 800
Maruti 800 (1984-2014 / MK 1) Let's see in this guide the main instructions that will allow us to disassemble and replace the seats of the Maruti 800, following these simple steps

How do you reset the tire pressure light on the Toyota Aygo X?

To reset the tire pressure warning light on the Toyota Aygo X, you need to inflate the tires until they reach the recommended pressure value: this will be indicated on the sticker attached to the driver's side door pillar. Once the tires are inflated, you can go inside the cabin and turn on the instrument panel: after it has been turned on, you can open the glove box on the passenger side and locate the SET button that must be held down to turn off the warning light.

Watch the video!


by ScegliAuto

More videos