Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Brake Pads on the Maruti Vitara Brezza

Model: Maruti Vitara Brezza MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Brake pads

This video is currently unavailable

This guide provides instructions on how to remove and replace the front brake pads on the Maruti Vitara Brezza, following these simple steps. First, lift the vehicle and remove the front wheel; then unscrew the bolts securing the front brake caliper, removing it from the rotor, as shown in the video.

At this point, remove the brake pads from the bracket, cleaning the caliper of any residual dirt; now press the caliper piston to retract it, allowing you to install the new original brake pads!


Updated on 5 August 2026 by ScegliAuto


Related tutorials

How to Replace the Front Bumper on the Maruti Vitara Brezza
How to Replace the Front Bumper on the Maruti Vitara Brezza
Maruti Vitara Brezza (2016-2023 / MK 1) This guide provides instructions to remove and replace the front bumper on the Maruti Vitara Brezza. First, open the hood and start unscrewing the mo…
How to Replace the Front Wipers on a Maruti Vitara Brezza
How to Replace the Front Wipers on a Maruti Vitara Brezza
Maruti Vitara Brezza (2016-2023 / MK 1) Let's briefly review the main steps on how to remove and replace the front wipers on a Maruti Vitara Brezza. First, move to the front of your vehicle…
How to Replace the Fuel Filter in a Maruti Vitara Brezza?
How to Replace the Fuel Filter in a Maruti Vitara Brezza?
Maruti Vitara Brezza (2016-2023 / MK 1) To replace the fuel filter in a Maruti Vitara Brezza, open the hood to access the engine compartment directly under the windshield. In the center are…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos