Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses located in the Maruti 800?

Model: Maruti 800 MK 1 - Years 1984-2014
Part: Fuse box

The fuses in the Maruti 800 are located inside the fuse box installed in the vehicle: it is situated in the cabin, on the lower left side of the dashboard relative to the steering column. You can access this box by removing the designated plastic protective panel; once the fuses are located, you can pull them out and replace them with spare parts of the same amperage. In this box, you can find the fuses responsible for the operation of the horn, low beam headlights, etc.

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Maruti 800?
Where are the fuses located in the Maruti 800?
Maruti 800 (1984-2014 / MK 1) Every fuse of the Maruti 800 is located inside one of the fuse boxes that are present on the vehicle: in this type of vehicle it is possible to ident…
Where is the OBD port located in the Maruti 800?
Where is the OBD port located in the Maruti 800?
Maruti 800 (1984-2014 / MK 1) The OBD2 port or diagnostic socket on a Maruti 800 vehicle is located inside the cabin, specifically under the steering wheel near the fuse box. Unli…
How to Remove the Seats from the Maruti 800
How to Remove the Seats from the Maruti 800
Maruti 800 (1984-2014 / MK 1) In this guide, you will find the main instructions that will allow you to remove and replace the seats in the Maruti 800 by following these simple st…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos