Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Box of the Maruti 800

Model: Maruti 800 MK 1 - Years 1984-2014
Part: Fuse box

If you are not familiar with the location of the fuses in this vehicle model, the description below provides all the information you need regarding their placement, and you can also refer to the tutorial video. Like most vehicles, this one has two fuse boxes. The first is located in the cabin just below the dashboard at floor level and is protected by a plastic cover that also has the diagram on it, while the other fuse box is located in the engine compartment near the battery. To get the details with the list of fuses and their corresponding numbers, you need to consult the owner's manual.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Maruti 800?
Where are the fuses located in the Maruti 800?
Maruti 800 (1984-2014 / MK 1) The fuses in the Maruti 800 are located inside the fuse box installed in the vehicle: it is situated in the cabin, on the lower left side of the dash…
Where is the OBD port located in the Maruti 800?
Where is the OBD port located in the Maruti 800?
Maruti 800 (1984-2014 / MK 1) The OBD2 port or diagnostic socket on a Maruti 800 vehicle is located inside the cabin, specifically under the steering wheel near the fuse box. Unli…
Where are the fuses located in the Maruti 800?
Where are the fuses located in the Maruti 800?
Maruti 800 (1984-2014 / MK 1) Every fuse of the Maruti 800 is located inside one of the fuse boxes that are present on the vehicle: in this type of vehicle it is possible to ident…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos