Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the resistor of the interior fan of the Maruti A Star?

Model: Maruti A Star MK 1 - Years 2008-2014
Part: Blower motor

To be able to replace the resistor of the passenger compartment fan of the Maruti A Star, you need to open the glove box located on the passenger side, unhooking the internal pins in order to remove it. After the drawer has been removed, it will be possible to access the components located in its rear part: here will be the resistor that will simply have to be disconnected from the fan, so that a new one can be installed. After this has been connected, it will be necessary to insert the glovebox again, fixing it with the appropriate internal pins.

Posted on 12 April 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front brake pads of the Maruti A-Star?
How do you replace the front brake pads of the Maruti A-Star?
Maruti A Star (2008-2014 / MK 1) In order to replace the front brake pads of the Maruti A-Star you have to go and lift the car using a jack or a bridge so that the corresponding whee…
How to replace the main fuse from the Maruti A Star 80 Ampere
How to replace the main fuse from the Maruti A Star 80 Ampere
Maruti A Star (2008-2014 / MK 1) The guide shows how to replace the main fuse of the Maruti A Star electrical system, i.e. the 80 Ampere fuse. This fuse is located on the positive po…
How do you replace the gas springs in the trunk of the Maruti A-Star?
How do you replace the gas springs in the trunk of the Maruti A-Star?
Maruti A Star (2008-2014 / MK 1) To be able to replace the gas springs of the rear door of the Maruti A-Star you have to open the tailgate, so that you have access to the internal co…

Removing the Timing Belt on a Suzuki Vitara

In this video, see the removal and replacement of the timing belt and water pump on a Suzuki Vitara. Open the bonnet and lift it, securing it in place. Use a socket wrench to remove the cooling radiator along with the associated hoses. Disconnect the power wiring using pliers, and remove the plastic undertray with a screwdriver. Use a spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket wrench to unscrew the tensioner pulley bolt, and remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket wrench. Finally, reinstall the radiator with the securing bolts.

Watch the video!


by ScegliAuto

More videos