Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on an Opel Movano

Model: Vauxhall Movano MK 2, Movano B - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Tire pressure warning light

See other generations:
Video tutorial

The first thing to focus on is ensuring the tyre inflation pressure is at the value specified by the manufacturer and listed in the owner's manual. This value is what triggers the warning light; if it is too low, for example, due to a puncture, no reset can be performed.

So, what should you do? First, check the condition of the tyres and intervene where necessary to restore the specified pressure, then turn on the ignition, press the buttons located at the end of the right steering lever to access the Menu, and select the relevant option for the wheels, resetting with the same buttons, which should be held down for a few seconds.


Posted on 14 March 2026 by ScegliAuto


Related tutorials

How to reset the "Service" light on an Opel Movano?
How to reset the "Service" light on an Opel Movano?
Vauxhall Movano (2010-2021 / MK 2, Movano B) Good morning, today you will reset the "Service" light on your Opel Movano. Before proceeding, ensure you have completed the service. Start by turnin…
How to reset the service light on the Opel Movano?
How to reset the service light on the Opel Movano?
Vauxhall Movano (2010-2021 / MK 2, Movano B) In this tutorial, you will see how to reset the service light on the Opel Movano, a very simple and quick operation. Before proceeding, ensure that y…
How to Reset the Service Light on an Opel Movano?
How to Reset the Service Light on an Opel Movano?
Vauxhall Movano (1998-2011 / Movano A, MK 1) In this tutorial, you will see how to reset the service light on an Opel Movano, a very simple operation to perform only after completing all schedul…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos