Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on an Opel Movano?

Model: Vauxhall Movano Movano A, MK 1 - Years 1998-2011
Part: Service warning light

In this tutorial, you will see how to reset the service light on an Opel Movano, a very simple operation to perform only after completing all scheduled maintenance tasks. First, insert the key and turn on the ignition. Then, scroll through the various display screens with quick presses of one of the two buttons at the end of the windscreen wiper control lever. Once you reach the service screen, press and hold both buttons for about 10 seconds, or for as long as necessary to display the correctly reset interval.

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light in an Opel Movano Van?
How to Reset the Service Light in an Opel Movano Van?
Vauxhall Movano (2010-2021 / MK 2, Movano B) Resetting the service light in an Opel Movano van, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure t…
How to reset the service in the Opel Movano van?
How to reset the service in the Opel Movano van?
Vauxhall Movano (2010-2021 / MK 2, Movano B) In this tutorial we can see how to reset the service in the Opel Movano van, an extremely simple and fast operation. Before doing this, we must have …
How to reset the service light on the Opel Movano?
How to reset the service light on the Opel Movano?
Vauxhall Movano (2010-2021 / MK 2, Movano B) In this tutorial, you will see how to reset the service light on the Opel Movano, a very simple and quick operation. Before proceeding, ensure that y…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos