Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Tail Light Bulb in a Maruti Vitara Brezza?

Model: Maruti Vitara Brezza MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tail light bulb

Video tutorial

To replace the tail light bulb in a Maruti Vitara Brezza, open the rear hatch to access the screws next to the light. Once these screws are loosened and removed, you can pull the light out from its housing to disconnect the connector at the back.

This allows you to remove the old bulb from its housing and insert the new one. After the new bulb is installed, reconnect the light and secure it back in its place.


Updated on 19 May 2026 by ScegliAuto


Related tutorials

Maruti Vitara Brezza (2016-2023 / MK 1) In this new mini guide dedicated to your Maruti Vitara Brezza, we will explain how to correctly replace the cabin air filter. This is a very importan…
Maruti Vitara Brezza (2016-2023 / MK 1) To replace the fuel filter in a Maruti Vitara Brezza, open the hood to access the engine compartment directly under the windshield. In the center are…
Maruti Vitara Brezza (2016-2023 / MK 1) To remove the antenna from the Maruti Vitara Brezza, open the glove compartment located at the top of the cabin, just behind the rearview mirror. By …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Remove the Spare Wheel from the Citroen C4 Picasso

Follow these instructions to remove the spare wheel and replace it on the Citroen C4 Picasso. On this model, the spare wheel is located under the vehicle's floor; to lower it, simply unscrew the bolt to loosen the strap, then disconnect it from the spare wheel, as shown in the video. At this point, lift the vehicle and remove the wheel, securing the spare wheel or space-saver; tighten the bolts in a criss-cross pattern, finally placing the old wheel back under the vehicle's floor!

Watch the video!


by ScegliAuto

More videos