Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Center Console with Cup Holder for Maruti Alto 800

Model: Maruti Alto 800 AOD - Years 2012-2023
Part: Rear bench seat

You will find this accessory only by searching for its name in English and only on alternative e-commerce sites. The price we found was only in Rupees, about 200.00 Rupees, which at the current exchange rate is just over $2.00. Changing the center console is not difficult; there are only two screws to remove and two clips to pop off. Remove the handbrake cover, and you can take out the entire console. At this point, position the new one, repeating the attachments we saw for removing the old one. Additionally, you will have a place to put a one-liter bottle for the rear seats.

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter in a Maruti Alto 800?
How to Replace the Air Filter in a Maruti Alto 800?
Maruti Alto 800 (2012-2023 / AOD) In this tutorial, you will see how to replace the air filter in a Maruti Alto 800, a very simple and economical task. Before proceeding, wait for the…
How to Time the Engine of the Suzuki Alto 800 - Maruti Alto 800
How to Time the Engine of the Suzuki Alto 800 - Maruti Alto 800
Maruti Alto 800 (2012-2023 / AOD) Today's guide will show you the main steps to time the engine of the Suzuki Alto 800 and Maruti Alto 800. First, open the hood of the vehicle and rem…
How to disassemble the dashboard of the Maruti Alto 800
How to disassemble the dashboard of the Maruti Alto 800
Maruti Alto 800 (2012-2023 / AOD) Today's guide will show us the steps to disassemble and replace the dashboard of the Maruti Alto, following the instructions below. First, we get int…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos