Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dome Light Bulbs in the Maruti Ciaz

Model: Maruti Ciaz MK 1 - Years 2014-2024
Part: Interior dome light bulb

If you want to replace the lights in the cabin of your vehicle to customize it, perhaps using differently colored bulbs, first access the cabin from the driver's side and open the sunglasses holder. Underneath, you will find a screw that needs to be removed; this will allow you to detach the entire dome light by pulling it down. Below it, you will find the bulb housing that you can detach and replace with other types. Then, reposition the dome light and reinsert the securing screw.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in a Maruti Ciaz?
How to Replace the Cabin Air Filter in a Maruti Ciaz?
Maruti Ciaz (2014-2024 / MK 1) Replacing the cabin air filter in a Maruti Ciaz is a very simple and quick task. Let's see how to proceed in this tutorial. Start by sitting in the p…
How to Replace the Rear Light of the Maruti Ciaz
How to Replace the Rear Light of the Maruti Ciaz
Maruti Ciaz (2014-2024 / MK 1) This guide provides instructions on how to remove and replace the rear light of the Maruti Ciaz by following these simple steps. First, move to the b…
How to Replace the Cabin Air Filter on a Maruti Ciaz
How to Replace the Cabin Air Filter on a Maruti Ciaz
Maruti Ciaz (2014-2024 / MK 1) If you notice a decline in air quality when you turn on the air conditioning system in your Maruti Ciaz, it means the cabin air filter is worn out an…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos