|
Do it yourself
| |||
| ||||
How to Change the Cabin Air Filter on a Maruti S-Cross.
Model: Maruti S Cross
MK 2
- Years:
2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Video tutorial
To change the cabin air filter - also known as the pollen filter - on a Maruti S-Cross, refer to the video that shows a right-hand drive model. The filter is located on the passenger side, to the left of the dashboard, behind the glove compartment. Remove it easily, as it is only held in place by pressure. Behind it, you will find the rectangle of the filter cover. In left-hand drive models, it will be on the right side of the vehicle. Pull it towards you, replace it, and insert it back into the cleaned compartment, paying attention to the printed instructions on the filter indicating the correct orientation. Replace the cover and reinsert the glove compartment. The job is complete.
Updated on 16 July 2026 by ScegliAuto
Related tutorials
Maruti S Cross
(2015-2022 /
MK 2)
How to change the spark plugs on a Maruti (or Suzuki) S-Cross with 67,000 miles: Start by removing spark plug number 1 with a ratchet wrench equipped…
Maruti S Cross
(2015-2022 /
MK 2)
.. how to replace the air filter in the Maruti S-Cross. First, open the hood using the lever located inside the cabin. Now locate the intake manifold.. …
Maruti S Cross
(2015-2022 /
MK 2)
To replace the air filter on a Maruti S-Cross, open the hood to access the components inside the engine compartment. Next, remove the screws securing…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.081
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |