Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you set the clock on the Maruti Vitara Brezza?

Model: Maruti Vitara Brezza MK 1 - Years 2016-2023
Part: Clock

The clock adjustment of the Maruti Vitara Brezza is done by turning on the instrument panel using the appropriate ignition key: once the panel is turned on, it will be possible to hold down both buttons located on the sides of the panel, noting that the hours will start flashing. These can be changed by rotating the button located on the right side of the instrument panel; then you can proceed to change the minutes by pressing both buttons again, noting that they will start flashing and can always be modified by rotating the button.

Posted on 16 September 2023 by ScegliAuto

Video tutorial

Related tutorials

How do you adjust the clock in the Maruti Vitara Brezza VDI?
How do you adjust the clock in the Maruti Vitara Brezza VDI?
Maruti Vitara Brezza (2016-2023 / MK 1) One of the reasons that could reset the clock of a car is disconnecting the power cables of the battery. In addition to this, there is also the switc…
How do you set the clock on the Maruti Vitara Brezza?
How do you set the clock on the Maruti Vitara Brezza?
Maruti Vitara Brezza (2016-2023 / MK 1) In order to set the clock of the Maruti Vitara Brezza, you need to go and turn on the instrument panel by turning the specific key inside the ignitio…
How do you set the clock of the Maruti Vitara Brezza?
How do you set the clock of the Maruti Vitara Brezza?
Maruti Vitara Brezza (2016-2023 / MK 1) The clock that appears on the instrument panel of the Maruti Vitara Brezza can be adjusted by turning on the instrument panel, so that it is possible…

Other guides you may be interested in

Remove Front Door Panel on Opel Insignia

How to remove the front door panel on an Opel Insignia? Follow these steps. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Begin the disassembly: use a lever to remove the plastic cover under the door handle, then use a screwdriver to unscrew the securing screws underneath. Once all screws are removed, detach the plastic clips that secure the door. Remove the door panel by hand, disconnect the power connectors and the door release cable.

Watch the video!


by ScegliAuto

More videos