Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on the Maruti Vitara Brezza?

Model: Maruti Vitara Brezza MK 1 - Years 2016-2023
Part: Clock

To set the clock on the Maruti Vitara Brezza, turn the ignition key in the ignition switch to power on the instrument cluster. Once the cluster is on, press both buttons located on its sides, and the hours will start to blink. Change the hours by rotating the knob on the right, confirming the change by pressing both buttons again; the minutes can then be adjusted using the same procedure, and finally, turn off the instrument cluster completely.

Updated on 29 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you adjust the clock in the Maruti Vitara Brezza VDI?
How do you adjust the clock in the Maruti Vitara Brezza VDI?
Maruti Vitara Brezza (2016-2023 / MK 1) One of the reasons that could reset the clock of a car is disconnecting the power cables of the battery. In addition to this, there is also the switc…
How do you set the clock of the Maruti Vitara Brezza?
How do you set the clock of the Maruti Vitara Brezza?
Maruti Vitara Brezza (2016-2023 / MK 1) The clock that appears on the instrument panel of the Maruti Vitara Brezza can be adjusted by turning on the instrument panel, so that it is possible…
How do you set the clock on the Maruti Vitara Brezza?
How do you set the clock on the Maruti Vitara Brezza?
Maruti Vitara Brezza (2016-2023 / MK 1) It will be possible to change the clock of the Maruti Vitara Brezza by first turning on the instrument panel, inserting the ignition key into the cor…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos