Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maserati
    3. :
  3. Ghibli
    4. : How do you remove the front bumper of the Maserati Ghibli?

Maserati Ghibli - Video tutorial

Model: Maserati Ghibli MK 1 - Years 2013-2023
Part: Front bumper
Operation: How do you remove the front bumper of the Maserati Ghibli?

In order to remove the front bumper of the Maserati Ghibli it is necessary to loosen all the fixing bolts that are inside the wheel arches, using a 27 torx wrench. The same screws will be located in the lower part of the bumper, and must be loosened to remove the car underside cover. The connectors below will need to be disconnected and the screws on the top of the bumper, near the headlights, will need to be loosened. This will allow the bumper to be detached from the front of the car, so that it can be replaced with a new spare part.


Posted on 26 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos