Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maxus
    3. :
  3. Maxus G10
    4. : Cabin air filter

Maxus G10 - Cabin air filter

Maxus G10 (2014-2023 / MK 1)
How to replace the pollen filter of the Maxus G10
Let's find out today how to remove and replace the cabin air filter or the pollen filter of the Maxus G10. First of all we get on board the car, on the front …read all…
Posted on 6 May 2024 by ScegliAuto
Maxus G10 (2014-2023 / MK 1)
How to replace the cabin air filter on Maxus G10
To replace the passenger compartment air filter, proceed as follows: open the passenger side door, locate the glove compartment under the passenger side …read all…
Posted on 25 April 2024 by ScegliAuto
Loudspeaker (1) Car stereo (1) Key (1) -board computer (2) Checks and maintenance (6) Air filter (1) Cabin air filter (2) Engine oil (1) Brake pads (1) Fuse box (1) Windscreen wipers (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos