Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maxus
    3. :
  3. Maxus G10
    4. : Engine oil

Maxus G10 - Engine oil

Maxus G10 (2014-2023 / MK 1)
How to change the engine oil and filter in the Maxus G10?
Let's remove the lower engine protection panel using a 10mm wrench and a Phillips screwdriver. Now let's take a 13mm wrench and unscrew the nut that acts as a …read all…
Posted on 4 April 2023 by ScegliAuto
Loudspeaker (1) Car stereo (1) Key (1) -board computer (2) Checks and maintenance (6) Air filter (1) Cabin air filter (2) Engine oil (1) Brake pads (1) Fuse box (1) Windscreen wipers (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos