Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maxus
    3. :
  3. Maxus G10
    4. : Checks and maintenance

Maxus G10 - Checks and maintenance

Maxus G10 (2014-2023 / MK 1)
How to use the Maxus G10 navigator.
Let's see in this short and simple guide how to use the satellite navigator of the Maxus G10, but also of the LDV G10. First of all, let's get on board the car …read all…
Posted on 23 June 2023 by ScegliAuto
Maxus G10 (2014-2023 / MK 1)
How to open the fuel cap of the Maxus G10?
Let's see in this short and simple guide how to open the fuel cap of the Maxus G10, following the instructions below. First of all, we take our remote control …read all…
Posted on 25 May 2022 by ScegliAuto
Maxus G10 (2014-2023 / MK 1)
How to change the Maxus G10 watch
Let's see in this guide how to change the date and time of the Maxus G10, following these simple and quick steps. First of all we get in the car and turn on …read all…
Posted on 21 May 2022 by ScegliAuto
Maxus G10 (2014-2023 / MK 1)
How is the service done on the Maxus G10?
To be able to service the Maxus G10 you have to go and lift the car, so that you can unscrew the oil drain plug. All the oil that escapes must be collected in …read all…
Posted on 21 May 2022 by ScegliAuto
Maxus G10 (2014-2023 / MK 1)
How to change the style of the Maxus G10 watch
Let's see in this short and simple guide how to change the style of the watch that we find on the central display of the instrumentation of the Maxus G10. …read all…
Posted on 12 May 2024 by ScegliAuto
Maxus G10 (2014-2023 / MK 1)
How to reset the service in the Maxus G10?
In this tutorial we can see how to reset the service in the Maxus T10, a very simple operation, to be carried out only after completing all the required …read all…
Posted on 27 April 2024 by ScegliAuto
Loudspeaker (1) Car stereo (1) Key (1) -board computer (2) Checks and maintenance (6) Air filter (1) Cabin air filter (2) Engine oil (1) Brake pads (1) Fuse box (1) Windscreen wipers (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos