Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maxus
    3. :
  3. Maxus G10
    4. : -board computer

Maxus G10 - -board computer

Maxus G10 (2014-2023 / MK 1)
How to connect your Maxus G10 SE to the app?
If you have connection problems with the on-board computer of your Maxus G10 SE, don't despair. Carefully follow the instructions you find in this video. To …read all…
Posted on 23 April 2023 by ScegliAuto
Maxus G10 (2014-2023 / MK 1)
How to reset the service light on the Maxus G10
If when you start your Maxus G10 you notice the appearance of the maintenance warning light (with a wrench shown above) do not worry because you can eliminate …read all…
Posted on 24 April 2024 by ScegliAuto
Loudspeaker (1) Car stereo (1) Key (1) -board computer (2) Checks and maintenance (6) Air filter (1) Cabin air filter (2) Engine oil (1) Brake pads (1) Fuse box (1) Windscreen wipers (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos