Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear brake pads of the Maxus G10

Model: Maxus G10 MK 1 - Years 2014-2024
Part: Brake pads

Let's find out below the main instructions that will allow us to remove and replace the rear brake pads of the Maxus G10. First we lift the car and start removing the rear wheel; after which we unscrew the fixing screws of the brake caliper, which we find on the back, using a socket wrench with extension. At this point we remove the caliper from the disc and then the relative brake pads; clean up the caliper and replace them with new ones, of the right type, inserting them in the correct direction. We just have to reassemble everything!

Posted on 10 May 2022 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the Maxus G10?
Where is the fuse box located in the Maxus G10?
Maxus G10 (2014-2024 / MK 1) If you are curious to know the exact location of the fuse box in your Maxus G10, all you need to do is read the instructions in the following mini gu…
How is the service done on the Maxus G10?
How is the service done on the Maxus G10?
Maxus G10 (2014-2024 / MK 1) To be able to service the Maxus G10 you have to go and lift the car, so that you can unscrew the oil drain plug. All the oil that escapes must be col…
How to use the Maxus G10 navigator.
How to use the Maxus G10 navigator.
Maxus G10 (2014-2024 / MK 1) Let's see in this short and simple guide how to use the satellite navigator of the Maxus G10, but also of the LDV G10. First of all, let's get on boa…

Other guides you may be interested in

How to Replace the Gear Gaiter on the Opel Meriva

Want to replace the gear gaiter on the Opel Meriva? Let’s see how to do it in this video: detach the gaiter frame from the plastic covering on the centre console (cut the plastic tie with side cutters). Once the gaiter to be replaced is removed, install the new piece. Reassemble: attach the gaiter to the plastic frame, then insert the cover onto the gear stick (secure the tie as shown in the video). Lower the gaiter until it clicks into place in the plastics of the centre console. Test the correct fitting of the previously installed parts.

Watch the video!


by ScegliAuto

More videos