Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery in the LDV D90 remote control?

Model: Maxus D90 MK 1 - Years 2017-2024
Part: Key

In this tutorial, we can see how to replace the battery of the LDV D90 remote control, an extremely simple and quick operation. To do this, we will need a replacement battery of type CR2032 and a small screwdriver with a flat tip. Let's start by extracting the metal key through the action of the appropriate button, then we insert the screwdriver into the indicated slot, lever it and unlock the back door. At this point, we remove the old battery and place the replacement one, making sure to respect the polarity. Finally, we follow the reverse procedure.

Posted on 23 December 2023 by ScegliAuto

Video tutorial

Related tutorials

Where is the chassis number located on the LDV D90?
Where is the chassis number located on the LDV D90?
Maxus D90 (2017-2024 / MK 1) The LDV D90 is a large SUV built in China by Saic, one of the largest Chinese manufacturers, also the owner of the Maxus brand. In fact, the LDV D90 …
To reset the service light on the Maxus D90.
To reset the service light on the Maxus D90.
Maxus D90 (2017-2024 / MK 1) Unlike the different models of Maxus, resetting the service light, also known as the maintenance light, on the Maxus D90 is done differently but not …
Guide to using the Maxus D90 Infotainment system.
Guide to using the Maxus D90 Infotainment system.
Maxus D90 (2017-2024 / MK 1) In this short and simple guide, we will see the main functions of the Maxus D90 infotainment system, following the instructions below. First, we get …

Other guides you may be interested in

How to Install an Additional Horn on a Fiat Punto

It may happen that the original horn starts to produce a sound that is noticeably underwhelming; at this point, you can decide to install a pair of sounders connected in parallel with the original one to achieve a more assertive sound. The installation is very easy, but it is important to direct the sound output towards an air intake, so you need to shape a support bracket to fix it to the slam panel with a single bolt. Once secured, take the positive power from the fuse box using a 2.5 mm² cable, tapping into the purple wire directly under the relay while connecting the ground directly to the negative terminal of the battery.

Watch the video!


by ScegliAuto

More videos