Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Biante
    4. : Throttle body

Mazda Biante - Throttle body

Mazda Biante (2008-2018 / MK 1)
How do you replace the throttle body of the Mazda Biante?
In order to replace the throttle body of the Mazda Biante you have to go and open the hood, so that you have access to the components inside the engine …read all…
Posted on 23 September 2022 by ScegliAuto
Battery (2) Key (1) Checks and maintenance (1) Throttle body (1) Bearing (1) Air filter (1) Cabin air filter (3) Engine oil (1) Brake pads (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos