Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Biante
    4. : Battery

Mazda Biante - Battery

Mazda Biante (2008-2018 / MK 1)
How to replace the battery in Mazda Biante
Let's see in this guide how to disassemble and replace the battery of the Mazda Biante, following the instructions below. First of all we open the bonnet of …read all…
Posted on 2 December 2022 by ScegliAuto
Mazda Biante (2008-2018 / MK 1)
How to replace the battery in the Mazda Biante?
In this tutorial we can see how to replace the battery in the Mazda Biante, a very simple and fast operation. First of all, make sure that the key is not …read all…
Posted on 2 May 2024 by ScegliAuto
Battery (2) Key (1) Checks and maintenance (1) Throttle body (1) Bearing (1) Air filter (1) Cabin air filter (3) Engine oil (1) Brake pads (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos