Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Mazda Biante

Model: Mazda Biante MK 1 - Years 2008-2018
Part: Battery

Follow this guide to remove and replace the battery in your Mazda Biante. First, open the hood of your vehicle and start by removing the plastic cover above the battery. Next, disconnect both terminals (positive and negative) by loosening the bolts. Then, remove the bracket screws to take the battery out of its compartment, as shown in the video. Now, install the new battery with the same amperage; connect the positive and negative terminals!

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Mazda Biante?
How to Replace the Battery in a Mazda Biante?
Mazda Biante (2008-2018 / MK 1) .. In this tutorial, you will see how to replace the battery in a Mazda Biante, a very simple and quick operation. First, ensure that the.. …
Where to Find the OBD Port on the Mazda Biante
Where to Find the OBD Port on the Mazda Biante
Mazda Biante (2008-2018 / MK 1) If you still can't find the OBD port on your Mazda Biante after several attempts, don't worry. Just follow these instructions to clear up any doubts.…
How to Open the Manual Ignition Key on Mazda Biante
Mazda Biante (2008-2018 / MK 1) If the Mazda Biante won't start with the electronic key, you can start it with the physical key. Like many European vehicles that can be opened with …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos