Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Throttle Body on a Mazda Biante?

Model: Mazda Biante MK 1 - Years 2008-2018
Part: Throttle body

To replace the throttle body on a Mazda Biante, open the hood to access the components inside the engine compartment. Remove the air filter box completely along with the corresponding filter. Underneath, you will find the throttle body, which must be removed by unscrewing the mounting screws and disconnecting the appropriate connectors. Once the old throttle body is freed, install the new one by reassembling all the components removed earlier.

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the OBD Port on the Mazda Biante
Where to Find the OBD Port on the Mazda Biante
Mazda Biante (2008-2018 / MK 1) If you still can't find the OBD port on your Mazda Biante after several attempts, don't worry. Just follow these instructions to clear up any doubts.…
How to Open the Manual Ignition Key on Mazda Biante
Mazda Biante (2008-2018 / MK 1) If the Mazda Biante won't start with the electronic key, you can start it with the physical key. Like many European vehicles that can be opened with …
How to Replace the Rear Wheel Bearing on a Mazda Biante?
How to Replace the Rear Wheel Bearing on a Mazda Biante?
Mazda Biante (2008-2018 / MK 1) To replace the rear wheel bearing on a Mazda Biante, lift the vehicle to access the bolts securing the corresponding rear wheel, then remove the whee…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos