How to Replace the Cabin Air Filter on a Mazda Biante

Model: Mazda Biante MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Air filter

This video is currently unavailable

To replace the cabin air filter on the vehicle, as with all Mazdas, follow this procedure: open the passenger side door and sit in the seat, open the glove compartment and disengage the stop by pressing the side tabs. At this point, you will be able to access the back of the compartment where the filter is located.

Remove it and, if necessary, clean or replace it. If you are replacing it, pay attention to the direction of insertion (arrow pointing up). Finally, lift the glove compartment back up, reinsert the stop blocks, and then close it.

Updated on 23 June 2026 by ScegliAuto

Other guides you may be interested in

Air Filter - Maintenance and repair on other vehicles

Cabin Air Filter - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

Seat - Maintenance and repair on other vehicles

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!

by ScegliAuto

How to Replace the Cabin Air Filter on a Mazda Biante

Related tutorials

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

More videos