Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter in the Mazda Biante?

Model: Mazda Biante MK 1 - Years 2008-2018
Part: Cabin air filter

In this tutorial, you can see how to replace the cabin air filter in the Mazda Biante. To access it, go under the dashboard on the passenger side, as it is positioned at the junction between the dashboard and the center tunnel. Once you move any carpet and locate the long rectangular door, open it by unscrewing the two indicated screws and remove the old filter. If you have difficulty due to the limited space, you can temporarily disconnect the large connector located right in front of the housing. After inserting the replacement, reassemble everything by following the reverse procedure.

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in a Mazda Biante
How to Replace the Cabin Air Filter in a Mazda Biante
Mazda Biante (2008-2018 / MK 1) In today's video, we will see how to replace the cabin air filter in a Mazda Biante. First, access the vehicle from the passenger side. At this point…
How to Replace the Cabin Air Filter in the Mazda Biante?
How to Replace the Cabin Air Filter in the Mazda Biante?
Mazda Biante (2008-2018 / MK 1) .. In this tutorial, see how to replace the cabin air filter in the Mazda Biante, a very simple and quick operation. First, sit.. …
How to Replace the Throttle Body on a Mazda Biante?
How to Replace the Throttle Body on a Mazda Biante?
Mazda Biante (2008-2018 / MK 1) To replace the throttle body on a Mazda Biante, open the hood to access the components inside the engine compartment. Remove the air filter box compl…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos