Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Mazda Biante?

Model: Mazda Biante MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

Video tutorial

In this tutorial, you will see how to replace the battery in a Mazda Biante, a very simple and quick operation. First, ensure that the key is not in the ignition for safety.

Then, open the hood and, using a 10mm wrench, remove the lower mounting bolt. Next, remove the plastic cover, unscrew the second mounting bolt, and loosen the nuts on both terminals, disconnecting the negative terminal first.

At this point, you can remove the old battery and install the replacement by following the reverse procedure. Reconnect the positive terminal first.


Updated on 17 May 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Mazda Biante
How to Replace the Battery in a Mazda Biante
Mazda Biante (2008-2018 / MK 1) Follow this guide to remove and replace the battery in your Mazda Biante. First, open the hood of your vehicle and start by removing the plastic cove…
Where to Find the OBD Port on the Mazda Biante
Where to Find the OBD Port on the Mazda Biante
Mazda Biante (2008-2018 / MK 1) If you still can't find the OBD port on your Mazda Biante after several attempts, don't worry. Just follow these instructions to clear up any doubts.…
How to Open the Manual Ignition Key on Mazda Biante
Mazda Biante (2008-2018 / MK 1) If the Mazda Biante won't start with the electronic key, you can start it with the physical key. Like many European vehicles that can be opened with …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos